Best Stud Finder .info
for the best stud finder, first you must
determine the conditions and environment you are working in.
All stud finders require a bit of training to understand the
readings. Some can be used fairly quickly while the more
advanced models have thick user manuals to understand all their
functionality. Also keep in mind, any stud finder is never fool
proof. Using any stud finder can show confusing results so
always have a backup method just incase. Other features like AC
detection and center marking can save time and trouble down the
magnet might do the trick for a best stud
If your in a
pinch and cannot get a stud finder easily, try to use a magnet.
A large magnet will usually stick to the wall where a nail is,
which marks a stud. A small magnet tied to a string is another
good way to find studs. Just let the magnet hang from the
string and it will move toward a nail. Mark that spot on the
wall and when you have found a vertical line of marks, you have
found a stud.
stud finders are the best stud
stud finders actually find the stud and not the magnetic nail
or screw in them. Most use a sonic pulse through the paneling
and reading the echo back to the device. If the echo is fast
then the device knows there is a stud there and signals
accordinly. Most of these types of stud finders are set to
about 1 ½ inch depth. Some devices vary and have several depth
settings. The stud finder is telling you it sees something
within the range set but that does not mean it is a stud. The
best way to be sure is take various readings along a vertical
line of the first reading to make sure it is consistent. Sonar
stud finders don’t turn on immediately and may take several
seconds to configure themselves to be ready to use. If you putt
hem on a wall before they are ready then you might get false
readings. Echoes with these types of devices can also cause a
problem. The best way to counter this is to placeone hand on
the grip points and don’t touch it with the other hand. The
material in walls is often different and causes the sensitiviy
and depth of studs to be different as well. For instance,
drywall is more transparent than wood paneling and might give
slightly different readings. It would be hard to find a joist
in the floor with all the different layers of material for a
tile floor. For these reasons some stud finders will fail to
find a stud consistently.
Making a sound
stud finder is one that works well with you. Simple stud
finders are often highly rated. They are easy to use for
practical applications. The range of electronic stud finders is
about 1 ½ inches regardless of the price of such a device. More
expensive stud finders can find conduit and electrical wiring.
The devices which can detect the different objects are far
better if you use a stud finder regularly and will come at a
higher cost. In the simpler models, you will see a green light
and that could mean AC in that location or a stud depending on
what setting you have it set to.
One of the best stud finder is a
Zircon stud finder .More information
can be found on our site.